*Freeze and remove solid materials before cleaning.
*If the stain persists, add the vinegar/water solution outlined in
Step 3 with the detergent solution outlined in Step 1. Follow Step 1 procedures.
Easy as 1-2-3
Most household stains can be removed using the “Easy as 1-2-3 method”.
Oil-based stains, however, will require the use of a dry cleaning solvent prior to using this cleaning method.
Use a spoon or dull knife to remove solid materials. For a large stain, work from the outside of stain to the center to prevent spreading. Blot up liquid spills with a
white towel or paper towel.
Mix a solution of ¼ teaspoon of clear hand dishwashing detergent with 1 cup of water. Stir gently. Apply detergent solution
directly to a white cloth. Dampen the carpet fibers in the stained area with the cloth. Avoid saturating the carpet.
Wipe gently. Turn cloth frequently.
Never rub, scrub or use a brush. This may damage carpet fibers. If necessary, use your fingertips to work the solution to the base of the stain. Wet the stained carpet fibers with clear, lukewarm
water to rinse. Cover the spot with an absorbent white towel or paper towel and apply pressure to blot.
Repeat the rinsing and blotting procedures until
you are sure all traces of detergent have been removed.
If the stain is gone, place an absorbent white towel or paper towel over the area cleaned and
weigh towels down with a heavy, color-fast object such as a weighted plastic wastebasket.
Change towels or paper towels until carpet dries. If the stain
remains, proceed to Step Two. (For coffee, tea or urine, skip Step Two & proceed to Step Three.) Step 2:
Do not use on coffee,
tea or urine stains.
Mix 2 tablespoons of non-bleaching, non-sudsing household ammonia with 1 cup of lukewarm water. Apply ammonia solution,
rinse & blot as outlined in Step One. Do not dry with paper towels. Proceed to Step Three to neutralize the ammonia solution. Step 3:
Mix 1 cup of white vinegar with 2 cups of water.
Apply the vinegar solution, rinse and blot as outlined in Step One.
Most household spills and stains can be removed using this easy method. For best results, always clean up spots and spills immediately. Locate your stain on the chart and follow the cleaning steps
until the stain is removed.
It is not unusual for stains to reappear after spot cleaning. This is referred to as “wicking”. Wicking can occur when a liquid is
spilled on the carpet (usually a large quantity). Cleaning can remove only the stain from the carpet fibers. Liquid still remains in the carpet backing or padding. Through capillary action, the stain
can “wick” back up into the carpet fibers. These stains are not permanent and typically can be removed by simply repeating the appropriate step-by-step directions listed here. It is important
that you place paper towels weighed down by a heavy object over the area while the carpet is drying to absorb any remaining stain substances.
Important: Although your carpet may not look dirty, you are still required to have your carpet professionally cleaned regularly (every 12 - 18 months) to comply with some manufacturers’ stain or
soil protection warranties.